Hi! I'm Bart Bonte, a Belgian independent game designer and bontegames.com is where I blog about new interesting browser and mobile games. My own games are all in the left column (or at the bottom of this page on mobile). More info about me and my games on bartbonte.com.
Get in touch: email - twitter - facebook - youtube - instagram
October 31, 2009
radio dismantlement
Please dismantle the radio, you have only one screwdriver: radio dismantlement, a new puzzler by GameDesign.
I just looked at the videowalkthrough, and it is the exact same code as i thought, but it just wont work for me....soooo i decided to quit the game....
Sorry, was out late last night and forgot to post the walkthrough!
@ Brownie: look at step 8 if you want to know how to solve your problem. Sorry my instructions earlier were actually a bit misleading.. because I previously played without sound, I made a slightly wrong assumption about what I did to solve the puzzle =P
Walkthrough (Spoilers!!!)
1) Turn your radio over, take out the 4 screws, and remove the back.
2) Go to the Danger box and open it. The wheel in the box has a hole that lets you see underneath. This is controlled by the left dial. There is a similar wheel right under this wheel, controlled by the right dial.
3) When you turn the wheels with the dial, the hole moves. Keep turning the two wheels, keeping the holes aligned until you find all the screws and have unscrewed them.
4) There should be 2 screws, at the ~4 oClock and 9 oclock positions.
5)Close and open the box again. The wheel and dials should be gone, revealing a screw on the right. Take it out.
6)Zoom out. Note how there's a while on the left that also has a hole.
7) It reveals that there's a screw at the 6 0Clock position. The goal is to make the wheel stop there.
8) See the little arrow at the center of the wheel? Any idea what you want to do with it? =)
9) Click the arrow so that it is aligned with where you want the wheel to stop.
10) Turn back to the front of your radio. What do you think can stop that wheel from turning? Which button on here seems useless up to now?
11) Click the channel seeking panel on the top right. The dial on the right has 3 options. Turn up, turn down, or press in. Press the button in.
12) Go to the back. Your wheel should have stopped turning. If you did it correctly, you should be able to take out that screw on the bottom now. If you got it wrong, go back to the front, press the button again to set the wheel in motion and try again. Note: arrow only works if wheel is in motion.
13) Take out the screw that the wheel just revealed. You can now open the box on the bottom left.
14) There are 4 numbers in the box, and then a diagram indicating that this is a lock and it is currently in the lock position. So you need a 4 digi code with digits from 1 to 9. Where may you be able to find such a code?
15) As the only place with 9 digits, that'd be the chanels seeking panel. Go there and mess around with the dial and try to figure out the code.
16) How to get the code: if you scroll up and down, you'd realize that going to a certain number (regardless of if you get there by scrolling up from a smaller number of scrolling down from a larger number) would cause the screen to flash. Note which numbers cause the screen to flash. Those are the digits that makes up the code. The "channel" on top tells you the order.
17) Go back to the back and enter the code.
18) You might notice that you can only manipulate 1 digit. What do you think can control which of 4 digits can be manipulated?
19) Go back to the front. Click on the dial on the bottom right. When it is set to 1, you can enter the 1st digit of the code on the back. If it is set to 2, you can enter the 2nd digit, etc.
20) The code is 1593
21) Once you get it correctly, it'll automatically go to unlock mode. Go back to the front and click on the bottom right dial to remove it.
22) Unscrew the 3 screws. Click on the black knob on the right to remove it.
23) Go back to the back. Click on the bottom left box to remove it. Unscrew the 2 newly revealed screws.
24) Zoom out. Click on the center of the wheel to remove it.
25) Click on the top left yellow box. There is a dial, again with the lock/unlock diagram. Anything you can use for instructions here?
26) Top right, it says right 7, left 3. What can it mean? Try it. If that doesn't work, what else can it mean?
27) It means turn to the right until you reach 7. Then turn to the left until you reach 3. Before you leave this screen, take out the screw on your right.
28) Go to the front and take out the channel surf dial.
29) Go to the back and click on the top left box to remove it and then zoom back out.
30)Take out the last screw, then click on the red arrow at the top left corner to take out the back board.
31) Zoom into the speakers. Remove the screws and remove speaker.
32) Click on white box. This reveals you have 5min to dismantle a bomb. This is the only part of the game where you can die, but once you die, you come right back to the scene just before you open the white box, so play with this all you like. There will be a counter though at the end that tells you how many times you died.
33) Hint for bomb puzzle: you don't need the pliers.
34) Click the right side of the top portion of the box, where the bomb is. This will show you another angle of the box, revealing a active/inactive bomb diagram. Use your screwdriver to switch to inactive.
35) Go back to the normal view of the box. Click the timer to find a screw under it. Take that out. Now you can remove the whole bomb. Take out the final screw. Click on the box to remove it. Congratulations! You're out =)
MOOHAHAHAAA!!! only one explosion and it was an accident, i took the pliers and wen i was clicking the edge to look at the side, it cut a wire and well... u know (BOOM!)
If you are you looking for a solution or a walkthrough for one of the game links, please have a look in the comments.
Are you on facebook? Bontegames is too! Like the bontegames facebook page:
48 comments:
FIRST!
-zacharyK
Can you give me hint about the code?
Hint for the code.
Flip through the channels. See which ones flash.
hmmmm, i have tried that, but everytime there is another one flashing :-(
But thanx for the tip, i will try again...
YOU COMPLETED DISMANTLEMENT
Only 4 explosions.
Not bad.
Who would have guessed that dismantling a radio would lead to explosions.
Fun game.
I just looked at the videowalkthrough, and it is the exact same code as i thought, but it just wont work for me....soooo i decided to quit the game....
That was a lot of fun!! Though, I did explode 4 times haha, but I figured it out!! yay!
Hint about code: The order of the code is written above the numbers.
lol I exploaded 4 time too lol
i exploded three times. each for each possible cutting point, which i then suspected there's something else. nice short game.
Really nice game! Good variation on the room-escape theme!
=D
haha i exploded ZERO TIMESSSSS =D
haha, so why do we need to dismantle a radio then :-)
Oh 6 explosions!! I love this game... simple and nice
I've become a member of the four explosions club.
Nice little game.
When they give you directions at the beginning they are very clear you should only use ONE tool. So... even if you get another tool. Don't use it!
Help!! im terible at these kind of puzles but i cant help playing themD=
I got the code and the litle nob is turned to unlock but now im stuck.
Yay I cmpleated it whithout a walkthrough or any explosions.
Im so happy. =D
never thought my average radio was so complicated!? and so far I'm the only one with 2 explosions :D
0 explosions yay
ok i'm so confused, so far i've got the bac off and taken off the thing at the top right on the bac, can any1 help?
Very nice one :)
5 explosions .. quite bad .. lol
but i loved it :D
why do i have to take it apart and 'splode myself up? why cant i just smash the stupid thing???
i deperately need a nice walkthrough
@ Brownie:
Remember how you tried to align a hole with a screw to dismantle the box on top right? Where else might you have the same problem?
If you've already discovered what I'm talking, go back to the front and fiddle with the knobs until you can uncover the screw.
Go try it before reading on! But if you need more hints: I'm not sure if my method was correct, but I lined up the numbers controlled by the dials.
I'll write a walkthrough later if by the time I get off work, no one else has posted a walkthrough yet =)
anonymous(#24): because then it would explode. :P
But seriously, I think you're a bomb expert who has to take the radio apart to get the bomb out. That's why you have to do it piece by piece. :)
ty for the help coffeteamix but i'm still stuck...i don't get wat i'm uncovering and how?
i can't figure out the yellow thing in the upper left corner. i'm hopelessly stuck there. help please?
10 explosions... took me forever to discover that u didnt need to cut a wire
Imer, I'm with you on two explosions, one for each color. Then I started poking around some more. No help from anywhere.
What fun!! I SO enjoyed this game!!! I was giggeling for joy when I finished it! Not easy and not hard - just PERFECT! Thanks, Bart!
Yayyyy, fun!! Even better the second time around :D
Lichen Fairy: ohhhh okay :P
for the yellow thing in the tlh corner: go forward to seven then back to three.
Just one explosion hehe
love this game!!
Sorry, was out late last night and forgot to post the walkthrough!
@ Brownie: look at step 8 if you want to know how to solve your problem. Sorry my instructions earlier were actually a bit misleading.. because I previously played without sound, I made a slightly wrong assumption about what I did to solve the puzzle =P
Walkthrough (Spoilers!!!)
1) Turn your radio over, take out the 4 screws, and remove the back.
2) Go to the Danger box and open it. The wheel in the box has a hole that lets you see underneath. This is controlled by the left dial. There is a similar wheel right under this wheel, controlled by the right dial.
3) When you turn the wheels with the dial, the hole moves. Keep turning the two wheels, keeping the holes aligned until you find all the screws and have unscrewed them.
4) There should be 2 screws, at the ~4 oClock and 9 oclock positions.
5)Close and open the box again. The wheel and dials should be gone, revealing a screw on the right. Take it out.
6)Zoom out. Note how there's a while on the left that also has a hole.
7) It reveals that there's a screw at the 6 0Clock position. The goal is to make the wheel stop there.
8) See the little arrow at the center of the wheel? Any idea what you want to do with it? =)
9) Click the arrow so that it is aligned with where you want the wheel to stop.
10) Turn back to the front of your radio. What do you think can stop that wheel from turning? Which button on here seems useless up to now?
11) Click the channel seeking panel on the top right. The dial on the right has 3 options. Turn up, turn down, or press in. Press the button in.
12) Go to the back. Your wheel should have stopped turning. If you did it correctly, you should be able to take out that screw on the bottom now. If you got it wrong, go back to the front, press the button again to set the wheel in motion and try again. Note: arrow only works if wheel is in motion.
13) Take out the screw that the wheel just revealed. You can now open the box on the bottom left.
14) There are 4 numbers in the box, and then a diagram indicating that this is a lock and it is currently in the lock position. So you need a 4 digi code with digits from 1 to 9. Where may you be able to find such a code?
15) As the only place with 9 digits, that'd be the chanels seeking panel. Go there and mess around with the dial and try to figure out the code.
16) How to get the code: if you scroll up and down, you'd realize that going to a certain number (regardless of if you get there by scrolling up from a smaller number of scrolling down from a larger number) would cause the screen to flash. Note which numbers cause the screen to flash. Those are the digits that makes up the code. The "channel" on top tells you the order.
17) Go back to the back and enter the code.
18) You might notice that you can only manipulate 1 digit. What do you think can control which of 4 digits can be manipulated?
19) Go back to the front. Click on the dial on the bottom right. When it is set to 1, you can enter the 1st digit of the code on the back. If it is set to 2, you can enter the 2nd digit, etc.
20) The code is 1593
21) Once you get it correctly, it'll automatically go to unlock mode. Go back to the front and click on the bottom right dial to remove it.
22) Unscrew the 3 screws. Click on the black knob on the right to remove it.
23) Go back to the back. Click on the bottom left box to remove it. Unscrew the 2 newly revealed screws.
24) Zoom out. Click on the center of the wheel to remove it.
25) Click on the top left yellow box. There is a dial, again with the lock/unlock diagram. Anything you can use for instructions here?
26) Top right, it says right 7, left 3. What can it mean? Try it. If that doesn't work, what else can it mean?
27) It means turn to the right until you reach 7. Then turn to the left until you reach 3. Before you leave this screen, take out the screw on your right.
28) Go to the front and take out the channel surf dial.
29) Go to the back and click on the top left box to remove it and then zoom back out.
30)Take out the last screw, then click on the red arrow at the top left corner to take out the back board.
31) Zoom into the speakers. Remove the screws and remove speaker.
32) Click on white box. This reveals you have 5min to dismantle a bomb. This is the only part of the game where you can die, but once you die, you come right back to the scene just before you open the white box, so play with this all you like. There will be a counter though at the end that tells you how many times you died.
33) Hint for bomb puzzle: you don't need the pliers.
34) Click the right side of the top portion of the box, where the bomb is. This will show you another angle of the box, revealing a active/inactive bomb diagram. Use your screwdriver to switch to inactive.
35) Go back to the normal view of the box. Click the timer to find a screw under it. Take that out. Now you can remove the whole bomb. Take out the final screw. Click on the box to remove it. Congratulations! You're out =)
that was cool
0 explosions
No boom?
No boom.
No boom TODAY. Boom tomorrow. There's always a boom tomorrow.
0 explosions!! thanks to coffeeteamix. I think Im going to play it again just to get an explosion
MOOHAHAHAAA!!!
only one explosion and it was an accident, i took the pliers and wen i was clicking the edge to look at the side, it cut a wire and well... u know (BOOM!)
Thank you, coffeeteamix. (When you say click the right side of the bomb box, you mean the left side, I think.)
anonymous is right... i did mean the left side ^^; I'm getting my lefts + rights all mixed up >< Sorry!
I exploded 11 times(thanks coffetemix)
I got 0 explosions on my first go!
HA HA. Nice game.4 explosions love it
just a copy of katkai dismantlement. COMPLETLELY.
Post a Comment